Hollow disk pump L series

Positive displacement hollow disk pump with external seal. The seal is located externally inside the rear stuffing box and the pump shaft is frontally supported on bearing bushing. This arrangement makes the pump suitable for heavy duty applications and for continuous service. The particular configuration allows monitoring and replacement of the seal from back without disassembling the pump body. The pump is self-priming with high dry suction capability, reversible, can process solid parts and offers high performance also in the most critical process applications. This pump model is available in the single body, double body or triple body version and also in stainless steel construction

Hollow disk pump type L versions

For increasing the flowrate

"L" Series - Single body

"L" Series - Double body

"L" Series - Triple body


Technical features

Exclusive technology for any application

External seal

External seal

High reliability in heavy duty applications.

Self-priming

Self-priming

Automatically priming with vacuum creation in suction side.

Reversible

Reversible

Fully reversible with same technical features in both directions of rotation.

Elastic

Elastic

The elastic device of the oscillating hollow disc allows the passage of solid parts.

Low rotation speed

Low rotation speed

The low operating speed does not emulsify the liquids and guarantees high reliability.

Atex zone 1 standards

Atex zone 1 standards

Atex zone 1 compliance for all applications in explosion proof areas.


Working principle

Elastic, simple, robust

Working principle

The oscillating hollow disk moves inside the body generating two volumes, the suction volume and the discharge volume, separated by the diaphragm. The fluid passes through the openings of the pump body. The hollow disk is kept pressed against the walls of the body by a spring which makes the system elastic and allows the passage of solid bodies. Compared to competitor models, the new range of hollow disk pumps developed by Belli Meccanica starting from 2008, has wider sliding surfaces and reduced eccentricity of the disk. These technical improvements ensure excellent performance and superior reliability.


Technical features of the hollow disk L series pumps

The seal is set externally inside the rear stuffing box and the pump shaft, equipped with a replaceable hardened wear bushing, is supported on bushing bearing. This arrangement makes the pump suitable for critical applications and for use in continuous service. The particular configuration allows the monitoring and replacement of the seal from back (back-pullout design) without dismantling the pump body, and allows the installation of any type of seal.

Body sealed with O-rings (NBR, VITON, PTFE, KARLEZ), no liquid or flat gaskets

Hollow disk with guided bushing bearing

Hollow disk with guided bushing bearing

Heavy duty shaft supported on bushing bearing with replaceable hardened wearing bushing

Rear external seal: Installation of every type of seal (single mechanical, double, Api plans), Easy seal replacement from back (back-pullout design) without dismantling the pump body

In-line coupling: No misalignment, No vibrations, Longer bearings life

Available: Atex electric motor, Manual speed variator, VFD inverter variator

  • Body sealed with O-rings (NBR, VITON, PTFE, KARLEZ), no liquid or flat gaskets

  • Hollow disk with guided bushing bearing

    Hollow disk with guided bushing bearing

  • Heavy duty shaft supported on bushing bearing with replaceable hardened wearing bushing

  • Rear external seal: Installation of every type of seal (single mechanical, double, Api plans), Easy seal replacement from back (back-pullout design) without dismantling the pump body

  • In-line coupling: No misalignment, No vibrations, Longer bearings life

  • Available: Atex electric motor, Manual speed variator, VFD inverter variator


    Available seals for L pump series

    Installation of every type of seal allowed

    Single mechanical or cartridge seal

    Single mechanical or cartridge seal

    Double mechanical seal with flushing liquid according to Api plans

    Double mechanical seal with flushing liquid according to Api plans

    Din or Api seal

    Din or Api seal

    Packing seal

    Packing seal

    Viton ring or Ptfe lip seal

    Viton ring or Ptfe lip seal

    Custom arrangements of packing seal plus ring seal with flushing and recirculation

    Custom arrangements of packing seal plus ring seal with flushing and recirculation

    FaLang translation system by Faboba

    Performances - Hollow disk L Series pump


    SINGLE BODY

    SIZE Ø PIPES FLOW MAX MOTOR POWER
    M 40 1- 1/4" - 2" 5000 l/h kW 1,1 - 1,5
    M 60 2" - 2-1/2" 11000 l/h kW 1,5 - 2,2
    M 70 2- 1/2" 20000 l/h kW 2,2 - 3
    M 85 3" 30000 l/h kW 4 - 7,5
    M 100 4" 45000 l/h kW 7,5 - 11

    DOUBLE BODY

    SIZE Ø PIPES FLOW MAX MOTOR POWER
    D 90 4" 45000 l/h kW 7,5 - 11
    D 100 4" 70000 l/h kW 15 - 18,5
    D 140 5" 120000 l/h kW 18,5 - 22

    TRIPLE BODY

    SIZE Ø PIPES FLOW MAX MOTOR POWER
    T 110 4" - 5" 65000 l/h kW  15 - 18,5
    T 130 5" 100000 l/h kW 18,5 - 22
    T 160 6" 200000 l/h kW 37 - 45
    T 250 8"-10" 500000 l/h kW 90

    Materials range - Hollow disk L Series pumps


    TYPE
    IMPELLER/SHAFT
    COVER/BODY
    BASE
    FIELD OF APPLICATION
    1 CARBON STEEL CAST IRON GJL250 CAST IRON GJL250
    PETROLEUM PRODUCTS, DIESEL, PETROL, KEROSENE, RFO HEAVY OIL, CRUDE OIL, BITUMEN, PARAFFIN, PAINTS, GLUES, RESINS, ISOCYANATE, SOLVENTS, FATS, OILS, PALM OIL, MELASSE, STARCH, WASTE, EXHAUSTED OIL, EXHAUSTED OIL
    2 STAINLESS STEEL BRONZE B14 CuSn6 CAST IRON GJL250
    SOAP, PATCHES, OIL WATERS, LUBRICANTS LIQUIDS, SOLVENTS
    5 STAINLESS STEEL STAINLESS STEEL CAST IRON GJL250
    OILS, BASIC LIQUIDS, WATER-BASED PAINTS, EMULSIONS, SURFACTANTS, GLUCOSE, SYRUP
    7 STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL
    EXTRA VIRGIN OLIVE OIL, FOOD LIQUIDS, CHOCOLATE, HONEY, GLUCOSE, SYRUP, CORROSIVE PRODUCTS, SOAP, SURFACTANTS
    8 STAINLESS STEEL CAST IRON GJL250 CAST IRON GJL250
    PETROLEUM PRODUCTS, DIESEL, PETROL, KEROSENE, RFO HEAVY OIL, CRUDE OIL, BITUMEN, PARAFFIN, PAINTS, GLUES, RESINS, ISOCYANATE, SOLVENTS, FATS, OILS, PALM OIL, MELASSE, STARCH, WASTE, EXHAUSTED OIL, EXHAUSTED OIL

    Performances:

    • MAX OPERATING TEMPERATURE: 250°C
    • MAX LIQUID VISCOSITY: 500000 cSt
    • MAX DIFFERENTIAL PRESSURE: 8 Bar(g) OR STANDARD VERSION e 12 Bar(g) FOR HIGH PRESSURE VERSION
    • MAX DRY SUCTION CAPABILITY: -0,9 Bar (9 meters water column)
    • ROTATION SPEED RANGE: 80-350rpm

    Fields of application - Hollow disk pumps "L" series

    • Resins - paints - inks - solvents - isocyanates - polyol

    • Petroleum products - petrol - diesel - fuels - biodiesel - bitumen

    • Vegetable oils - extra virgin olive oil - animal and vegetable fats - margarine - tallow - oleine

    • Surfactants - soaps - additives - emulsions - chemicals

    • Glues - starch - adhesives

    • Glucose - syrups - molasses

    • Exhausted oils - spent solvents - sludge - waste products

    >> Go to the application fields page

    L series pump - technical features and advantages

    External seal

    The arrangement with bushing bearing supported shaft and rear external seal allows the installation of every type of seal and excellent performances in heavy duty applications.

    In-line coupling

    The in-line coupled arrangement avoids any type of misalignment between pump and gearmotor, vibrations and overloads on the bearings.

    Pump body with sliding surfaces and reduced eccentricity of the disk

    Higher suction capacity, less wear and smoother operation compared to the old hollow disk pump models and competitor models.

    Hollow disk with guided bushing

    The disk bushing is designed with an external guide that ensures effective support on the shaft and avoids the use of the spring end cup.

    Flanges according to UNI ISO PN10

    The flange connections are standardized UNI ISO PN10, adapters for ANSI RF150 and other types of fittings are available on request.

    Heating jacket in option

    Installation of pump body heating jacket and rear seal heating jacket for pumping hot liquids. The pump jacket is equipped with threaded connections for hot water, steam or diathermic oil line.

    Do you want to send a detailed request?

    Logo BMF Belli Meccanica Firenze